Transmotor DCG 35.75 EVR 12-40 VDC 

 

 

 

Transmotor generator DCG 35.75 EVR 12-40 VDC

 

The DCG type brush less transistorized charging generator has been specially developed and designed for battery charging and/or DC power supply for small boats, e.g. fishing vessels, pleasure boats and the like, but can also be used for many other purposes where a DC voltage supply stable over variable speed is required. 

 

Description:

The DCG generator series is a range of DC generators suitable for use as main generator (shaft generator) for many types of fishing vessels, small towing and supply vessels, pleasure boats and the like. Together with a combustion engine it can also be used as a transportable charging generator for industrial machines and vehicles.

The generators is available in power ranges from 0.5 to 5.6 kW with 12 or 24 volt D.C. It is made in a ventilated drip-protected IC01, IP21 design with a shaft made of a corrosion-proof material. Surface welded stands are standard but a different fixing device is available upon request.

The generator is constructed as an straight-pole half-wave generator with fraction slot winding without brushes or rotating windings (*1). It is self-exciting and can be used without a battery with optional direction of rotation. No use of external units is necessary as both the main rectifier with noise reduction and the voltage controller are integrated in the unit.

The voltage control consists of a glass-fiber reinforced circuit board as a low frequency pulse width modulating transistor control with an integrated regenerative feedback with RC coupling which ensures an almost non-dissipative pulse function. The DCG-35, -55 controller is embedded in a two-component polyurethane molding material for component cooling and protection against moisture. The controller for DCG-75 is integrated in the terminal box and consists of replaceable, moisture proof modules.

*1) The generator is constructed without moving electrical parts and this gives a very low service frequency and high level of reliability. As in the TM, PMG and ACG generators the ball bearings are the only moving parts (wearing parts).

Upon request a certificate can be issued or a copy of a previously classified installation can be provided.

 

DCG-35 EVR
Part number generator DC output voltage Max. DC current Output power in kW Input power in kW Full load working range 1/10 load at rpm
26016017 12-16 80 1.1 1.7 2500-4500 800
26016016 12-16 140 2.2 2.9 4000-7500 1400
26016018 24-30 22 0.6 1.1 1600-3000 400
26016015 24-30 48 1.3 2.2 2500-4500 800
26016014 24-30 90 2.4 3.6 4000-7500 1400
26016013 32-40 36 1.3 2.2 2500-4500 800
26016012 32-40 70 2.5 3.6 4000-7500 1400

 

DCG-55 EVR
Part number generator DC output voltage Max. DC current Output power in kW Input power in kW Full load working range 1/10 load at rpm
26026002 24-30 100 2.8 4.1 3000-4500 800
26026005 24-30 150 4.1 6.0 4000-6500 1200

 

DCG-75 EVR
Part number generator DC output voltage Max. DC current Output power in kW Input power in kW Full load working range 1/10 load at rpm
26046007 24-30 130 3.6 4.9 1250-5000 800
26046005 24-30 200 5.6 7.6 1900-5700 1200

 

 

 

 

 

 

Tilbage til forsiden

Copyright ® 2009 Transmotor ApS Lemtorpvej 13 - 17  7620 Lemvig  Tlf.: +45 9664 0977   Fax: +45 9664 0982  E-mail 
Transmotor ApS